Revision as of 06:21, 5 August 2019

Introduction

This Configuration Note describes how to set up Telcobridges FreeSBC/ProSBC for interworking between ITSP’s SIP Trunk or remote client access for Asterisk server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

FreeSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
Asterisk.For additional information on Asterisk, visit [1]

Example Environments

FreeSBC/ProSBC Configuration for SIPTrunking with Asterisk

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

Example Configuration

Step by step example SIP Trunk configuration.

SIP Trunking Example Configuration

Troubleshooting

Call Trace (Paid version only)	Test Call (Paid version only)	TBReport	Advanced Troubleshooting of FreeSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of FreeSBC

@@ Line 9: / Line 9: @@
 ==Prerequisites==
 *[[FreeSBC|FreeSBC]] devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections [[Product_Installation_SBC|installation guides]].
-*Asterisk.For additional information on Asterisk, visit [https://www.asterisk.org/]
+*Asterisk.For additional information on Asterisk, visit [http://www.asterisk.org/]
-==Example Environment==
+==Example Environments==
 [[Image:Skype_Environment.png|800px| ]]
-====FreeSBC Configuration for S4B====
+====FreeSBC/ProSBC Configuration for SIPTrunking with Asterisk====
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 31: / Line 31: @@
 | valign="top" |
-*[[Toolpack:Creating_an_IP_Port_Range_SBC A|Create an IP port range]]
 *[[Toolpack:Creating_a_SIP_Stack_SBC A|Create a SIP stack]]
 *[[Toolpack:Creating_a_SIP_Transport_Server_SBC A|Create a SIP transport server]]
@@ Line 45: / Line 44: @@
 ==Example Configuration==
-Step by step example FreeSBC SIP trunking configuration for Microsoft Skype for Business.
+Step by step example SIP Trunk configuration.
-*[[FreeSBC: Skype for Business Configuration: Example_A|Skype for Business Example Configuration - TCP]]
+*[[FreeSBC:SIP Trunking:Example_A|SIP Trunking Example Configuration]]
 ==Troubleshooting==

FreeSBC:Asterisk: Difference between revisions