ProSBC:Asterisk

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for Asterisk server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Asterisk. For additional information on Asterisk, visit Asterisk official web site.

Example Environments for SIPTrunking with Asterisk

Example Configuration

Step by step example SIP Trunk configuration.

• SIP Trunking Example Configuration

Example Environments for Remote Workers with Asterisk

Example Configuration

Step by step example Remote workers configuration.

• Remote Workers Configuration Instruction

Asterisk Configuration Files

In this section, you can find basic configuration files for Asterisk PBX.

extensions.conf - The extensions.conf file is one of the most used and most important configuration file in Asterisk PBX - it contains the dialplan.

For more details about the extensions.conf please visit Asterisk official website

• File:Extensions conf.zip

sip.conf - The SIP channels in Asterisk are configured in the sip.conf file.

For more details about the sip.conf file please visit Asterisk official website

• File:Sip conf.zip

features.conf - The features.conf file is where you can adjust or define the various feature parameters in Asterisk.

For more details about features.conf file please visit Asterisk official website

• File:Features conf.zip

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

Related Content

Please check David Duffett blog post for configuring ProSBC with Asterisk from this link