FreeSBC:SIP Trunking:Configuration A

Introduction

The SIP Trunking Configuration Tutorial provides you with a scenario-based approach to configure a ProSBC system and monitoring its status, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific application.

Prerequisites

ProSBC devices must be installed as described in their respective installation guides.

Typical SIP Trunking Sample

File:FreeSBC Sip Trunking.jpg

SIP TRUNKING CONFIGURATION

Prerequisites for configuration

[Todo]

Steps for configuration

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

Example Configuration

Step by step example SIP Trunk configuration.

• SIP Trunking Example Configuration

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC