Revision as of 06:01, 5 August 2019

Introduction

This Configuration Note describes how to set up Telcobridges FreeSBC/ProSBC for interworking between ITSP’s SIP Trunk and Asterisk Server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

FreeSBC devices must be installed as described in their respective with release 3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
Skype for Business 2015.For additional information on Skype for Business 2015, visit Microsoft

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create an IP port range Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

Step by step example FreeSBC SIP trunking configuration for Microsoft Skype for Business.

Call Trace (Paid version only)	Test Call (Paid version only)	TBReport	Advanced Troubleshooting of FreeSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of FreeSBC

@@ Line 1: / Line 1: @@
-{{DISPLAYTITLE:FreeSBC:Skype for Business}}
+{{DISPLAYTITLE:FreeSBC:Asterisk}}
 =Introduction=
-This Configuration Note describes how to set up Telcobridges FreeSBC for interworking between ITSP’s SIP Trunk and Microsoft’s Skype for Business Server 2015 environment.
+This Configuration Note describes how to set up Telcobridges FreeSBC/ProSBC for interworking between ITSP’s SIP Trunk and Asterisk Server.
 '''NOTE:''' SIP Trunk use G.711 in this test. There is no transcoding available.
-[[FreeSBC|FreeSbc]] is capable to connect your IP-PBX to Skype for low-cost VoIP calls using the Skype Connect. This is a simple how-to connecting FreeSBC to Skype.
 ==Prerequisites==