Latest revision as of 11:02, 16 May 2022

This article applies to:	Product	Version
	SBC	3.1

Introduction

This Remote Workers configuration instruction with a 3CX Example Configuration provides you with a step-by-step Remote workers Configuration of ProSBC with 3CX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. In this guide, FQDN (telcobridges.3cx.ca) is configured in the 3CX server, and registration forwarding is used in ProSBC. Please check how to configure the phone provisioning in 3CX for ProSBC from 3CX Phone Provisioning Settings

3CX Remote Workers Example

Configuration Steps

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create an IP port range Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP Allocate an open SIP NAP	Create a first call route

NAP Configuration

See Create SIP NAP and Create Open NAP
- The SIP NAP will be the 3CX NAP, and Open NAP will be from the Remote Clients.

SIP Domain Configuration

See Create a SIP domain
- The domain name will be the FQDN of the 3CX server. In our example, it will be telcobridges.3cx.ca

Route Configuration

In most cases, ProSBC will be required to route SIP calls (SIP Invite) to registered users. This is done by creating appropriate routes
3CX wants to see its FQDN in all messages. Please enable forward_sip_domain in the route settings.

@@ Line 1: / Line 1: @@
-=== '''''Applies to version: v3.1''''' ===
+{{DISPLAYTITLE: Remote Workers Configuration Instruction with 3CX}}
-{{DISPLAYTITLE:Remote Workers Configuration Instruction with 3CX}}
+{| class="wikitable"
+|-
+|rowspan="3"|This article applies to:
+|'''Product'''
+|'''Version'''
+|-
+|SBC
+|3.1
+|}
 =Introduction=
-Remote Workers Configuration Instruction with 3CX Example Configuration provides you with a step by step Remote workers Configuration of [[FreeSBC|FreeSbc]] with 3CX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. In this guide FQDN configured in the 3CX server and registration forwarding used in ProSBC. Please check how to configure the phone provisioning in 3CX for ProSBC from [[FreeSBC:3CX Phone Provisioning:3CX_Phone_Provisioning|3CX Phone Provisioning Settings]]
+This Remote Workers configuration instruction with a 3CX Example Configuration provides you with a step-by-step Remote workers Configuration of [[ProSBC|ProSBC]] with 3CX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. In this guide, FQDN (telcobridges.3cx.ca) is configured in the 3CX server, and registration forwarding is used in ProSBC. Please check how to configure the phone provisioning in 3CX for ProSBC from [[FreeSBC:3CX Phone Provisioning:3CX_Phone_Provisioning|3CX Phone Provisioning Settings]]
-=Remote Workers Example=
+=3CX Remote Workers Example=
+[[Image:3CX_Remote_Workers_1.png|800px]]
+====Configuration Steps====
+{| cellpadding="5" border="1" class="wikitable"
+|-
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 1) <br>Create IP Network
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 2) <br>Create Protocol Stack
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 3) <br>Create Call Route
+|-
+| valign="top" |
+*[[Toolpack:Configuring_Virtual_Port_SBC_C|Configuring an IP Virtual Port]]
+*[[Toolpack:Configuring_Vlan_SBC_A|Configuring a VLAN]]
+*[[Toolpack:Configuring_IP_Interface_SBC_A|Configuring IP Interfaces]]
+*[[Toolpack:Creating_an_IP_Port_Range_SBC_A|Create an IP port range]]
+| valign="top" |
+*[[Toolpack:Creating_an_IP_Port_Range_SBC A|Create an IP port range]]
+*[[Toolpack:Creating_a_SIP_Stack_SBC A|Create a SIP stack]]
+*[[Toolpack:Creating_a_SIP_Transport_Server_SBC A|Create a SIP transport server]]
+*[[Toolpack:Modify_Profile_Sbc_A|Modify profile]]
+*[[Toolpack:Allocating_a_SIP_Network_Access_Point_(NAP)_SBC A|Allocate a SIP NAP]]
+*[[Toolpack:Allocating_a_SIP_Open_Network_Access_Point_(NAP)_SBC A|Allocate an open SIP NAP]]
+| valign="top" |
+*[[Toolpack:Creating_a_First_Call_Route E|Create a first call route]]
+|}
+= NAP Configuration =
+* See [[Toolpack:Allocating a SIP Network Access Point (NAP) SBC A|Create SIP NAP]] and [[Toolpack:Allocating a SIP Open Network Access Point (NAP) SBC A|Create Open NAP]]
+** The SIP NAP will be the 3CX NAP, and Open NAP will be from the Remote Clients.
+= SIP Domain Configuration =
+* See [[Toolpack:Creating_a_SIP_Domain_SBC B|Create a SIP domain]]
+** The domain name will be the FQDN of the 3CX server. In our example, it will be telcobridges.3cx.ca
+= Route Configuration =
+* In most cases, ProSBC will be required to route SIP calls (SIP Invite) to registered users. This is done by [[Sip_registration_forwarding#SIP_Calls_routing|creating appropriate routes]]
+* 3CX wants to see its FQDN in all messages. Please enable '''forward_sip_domain''' in the route settings.

FreeSBC:3CX Remote Workers:Configuration A: Difference between revisions