Selecting Timeslots for TDM Interfaces

Applies to version(s): v2.5, v2.6, v2.7

Finally, timeslots must be assigned to the TDM interfaces that are associated with the H.248 configuration.

To do this:

1- Click Edit next to the line service you wish to configure, in the H.248 configuration window

(NOTE: A timeslot mask can be applied to all line services at once by selecting Timeslot mask for all line services instead)

2- Select timeslots:

• Add the desired timeslots by checking individual boxes, or simply select all times by clicking Select all
• Click Save

3- Verify that the "h248_fix_term_cfg was successfully updated" message appears