Modifying ISUP Userpart for SPIROU
This article applies to: | Product | Version |
Tmedia | 3.0, 3.2, 3.3 |
This article assumes that SS7 ISUP is configured.
1- Select ISUP from the navigation panel
2- Select the ISUP stack you wishto configure.
3- In the Editing Userparts section, select the ISUP userpart you to configure.
4- Select SPIROU in the Protocol Variant drop-down menu.
5- A new checkbox Strict SPIROU validation appears once SPIROU Protocol Variant is selected.
- Select this checkbox to make sure your configuraton is compliant with SPIROU.
6- Click Timers to expand the Timers section
- Set T6 Timer to a value between 60000 and 120000 ms (between 60 and 120 seconds)
7- Click Advanced Parameters to expand the Advanced Parameters section
- Uncheck the Allow group messages option
- Click Save
8- Verify that the "IsupUserpart was successfully updated" message is displayed
List of Parameters
- Name
- Protocol Variant
- MTP3 Sub Service field
- Default Nature of Address When Unspecified
- Default Numbering Plan When Unspecified
- T1 Timer
- T2 Timer
- T5 Timer
- T6 Timer
- T7 Timer
- T8 Timer
- T9 Timer
- T27 Timer
- T31 Timer
- T33 Timer
- T34 Timer
- T36 Timer
- Incoming Continuity Check timer
- Outgoing Continuity Check timer
- Exit (EXM) timer
- Circuit reservation timer
- Circuit reservation ack timer
- Explicit Call Transfer timer
- Release response timer
- Final release response timer