Creating an MTP3 Route
Applies to version(s): v2.5, v2.6., 2.7
MTP3 routes are built to route traffic from previously created point codes using linksets.
You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).
To create an MTP3 route:
1- Click Create New Mtp3 Route in the MTP3 network configuration window:
2- Configure the new MTP3 route:
- Enter a name for the route
- Select a point code for the route
- Select a restart procedure
- Select a point type
- Check the Route to Adjacent box, if this route is directed to an adjacent network
- Click Create
3- Verify that the "Mtp3Route was successfully created" message appears
4- Associate the newly created route with a linkset:
- Select a linkset from the list provided at the bottom of the route configuration window
- Click the "<<" button to associate the linkset with the newly created route