Creating MTP3 Links

Applies to version(s): v2.5, v2.6., v2.7

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with an MTP2 link; they are connected in a one-to-one fashion.

To create an MTP3 link:

1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

2- Configure the new MTP3 link:

• Enter a name for the link
• Under Type of link to bind, select MTP2
• Select an MTP2 link
• Click Create

3- Verify that the "Mtp3Link was successfully created" message appears

List of Parameters

• Name
• Type of Link to Bind
• Depending on the type chosen:
  • MTP2 Link
  • M2PA Link
  • M2UA Link