Creating MTP3 Links (M3UA)
Applies to version(s): v2.5, v2.6, v2.7
Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.
To create an MTP3 link:
1- Click Create New Mtp3 Link in the MTP3 linkset configuration window
2- Configure the new MTP3 link:
- Enter a name for the link
- Select MTP2 as the type of link to bind
- Select an MTP2 link
- Select a priority level
- Select a Messages priority
- Set the C Link value
- Enter a Link Test Slc (this value is unique in the link list)
- Enter Link Test Characters
- Click Create
3- Verify that the "Mtp3Link was successfully created" message appears