ProSBC:FreeSWITCH
Introduction
This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for FreeSWITCH server.
NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.
Prerequisites
- ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
- For additional information on FreeSWITCH, visit FreeSWITCH offical web site.
Example Environments for SIP Trunking with FreeSWITCH
Example Configuration
Step by step example SIP Trunk configuration.
Troubleshooting
Call Trace | Test Call | TBReport | Advanced Troubleshooting of FreeSBC |
---|---|---|---|