ProSBC:Asterisk

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for Asterisk server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Asterisk. For additional information on Asterisk, visit Asterisk official web site.

Example Environments for SIPTrunking with Asterisk

Example Configuration

Step by step example SIP Trunk configuration.

• SIP Trunking Example Configuration

Example Environments for Remote Workers with Asterisk

Example Configuration

Step by step example Remote workers configuration.

• Remote Workers Configuration Instruction

Asterisk Configuration Files

In this section you can find basic configuration files for Asterisk PBX.

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

Related Content

Please check David Duffett blog post for configuring ProSBC with Asterisk from this link