FreeSBC:Asterisk

Introduction

This Configuration Note describes how to set up Telcobridges FreeSBC/ProSBC for interworking between ITSP’s SIP Trunk or remote client access for Asterisk server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

• FreeSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Asterisk.For additional information on Asterisk, visit [1]

Example Environments for SIPTrunking with Asterisk

File:FreeSBC Sip Trunking.jpg

Example Configuration

Step by step example SIP Trunk configuration.

• SIP Trunking Example Configuration

Example Environments for Remote Workers with Asterisk

File:FreeSBC Remote Workers.jpg

Example Configuration

Step by step example Remote workers configuration.

• Remote Workers Configuration Instruction

Troubleshooting

Call Trace (Paid version only)	Test Call (Paid version only)	TBReport	Advanced Troubleshooting of FreeSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of FreeSBC Related Content Please check David Duffett blog pst for configuring FreeSBC with Asterisk from the following link [2]