Configuring a VLAN

Applies to version(s): v3.0

After you create a virtual port, you must create a new VLAN.

To configure a VLAN

1. Select IP Interfaces from the navigation panel

New image needed - under Hosts

2. Click the Virtual Ports tab.

• Select a Virtual Port

New image needed

4. Create a VLAN that uses this virtual port

• Click Create new Host VLAN

New image needed

5. Configure the new VLAN

• Enter a name for the VLAN
• If the port is to be used untagged, make sure Untagged is checked.
• If the port is to be used with a 802.1Q tag, uncheck Untagged and enter a VLAN ID.
• Click Create

new image needed

List of Parameters

• Name
• Untagged
• VLAN id