7800 Series Gateway Installation Guide

Hide TOC

About this Guide

---

This guide provides installation, and setup procedures for the 7800 series gateway.

---

---

Introduction

---

---

---

---

---

---

---

---

---

Preventing Electrostatic Discharge Damage

---

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.

---

Always follow ESD prevention procedures when removing and replacing modules: Ensure that the equipment is grounded. Wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the wrist strap clip to an unpainted surface of the equipment or the grounded equipment rack in order to channel away all ESD voltage safely to ground. To guard against ESD damage and shocks, the wrist strap and cord must be in proper working condition. If no wrist strap is available, and you must work with the equipment, ground yourself by touching a metal part of the chassis.

---

Recommended Reading

---

This document is written with the assumption that you have a clear understanding of the installation of the equipment described in this document and you are trained to work with the equipment. If you have any technical questions, TelcoBridges TB Support can be reached at the following numbers, or an email can be sent to: support.

• Americas & Europe Technical Support Centre (GMT-05:00, Montreal): Telephone: +1-450-655-8993 x131 or x102
• Asia Technical Support Centre (GMT +08:00, Hong Kong): Telephone: +852-3749-9818
• 24/7 International Support: Telephone: +1-866-438-4703

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

Installing the 7800 Series Telecom Units

---

---

---

---

---

---

---

---

---

---

---

---

---

---

Connecting to the TMS Network

---