SBC Basic configuration

These are the basic steps to have a working configuration. For more Use Cases, visit ProSBC Use Cases

IP Interfaces

Create the logical connections and set the IP addresses that the SBC is going to use. | Create the IP Interfaces

Create SIP Stack

Enable SIP signaling for the SBC
https://docs.telcobridges.com/Toolpack:Creating_a_SIP_Stack_SBC_A

SIP Transport Server

Configure the ports and protocols for the transport servers of the SIP stack.
[Create Transport Server]

Create NAPs for one side ('internal', IP PBX, SIP clients) and another side ('external', SIP trunk)

A Network Access Point or NAP represents the entry point to another network or destination peer (e.g. SIP proxy, ISUP interface peer, etc). A NAP can also be thought of as a trunk group
https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Network_Access_Point_(NAP)_SBC_A
or an OPEN NAP
https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Open_Network_Access_Point_(NAP)_SBC_A

Create DNS, assign DNS Server

https://docs.telcobridges.com/Toolpack:Configuring_DNS_Parameters_C

Create Routes

Creating a First Call Route