ProSBC:Wildix Cloud VoIP PBX SIP Trunk:Configuration A

Introduction

SIP Trunk Configuration Instruction with Wildix Cloud VoIP PBX Example Configuration provides you with a step-by-step SIP Trunk Configuration of ProSBC with Wildix Cloud VoIP PBX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. Please check how to configure the SIP Trunk in Wildix Cloud VoIP PBX Cloud for ProSBC from *SIP Trunk Configuration Instruction with Wildix Cloud VoIP PBX

Wildix Cloud VoIP SIP Trunk Example

Configuration Steps

(Step 1) Create IP Network	(Step 2) Create Protocol Stack	(Step 3) Create Call Route
Configuring an IP Virtual Port Configuring a VLAN Configuring IP Interfaces Create an IP port range	Create an IP port range Create a SIP stack Create a SIP transport server Modify profile Allocate a SIP NAP	Create a first call route

NAP Configuration

• See Create SIP NAP
  • Here, You must create two NAPs, one SIP NAP will be Wildix Cloud VoIP NAP and the other NAP will be for the SIP trunk provided by ITSP

DNS Settings

• Please check v3.1: DNS configuration
  • In the DNS configuration Query Dns SRV TCP must be disabled