Revision as of 10:38, 8 October 2024

Hide TOC

About this Guide

This guide provides installation, and setup procedures for the 7800 series gateway.

Conventions

Contact Us

Introduction

Identifying the 7800 Series Gateway Equipment

Installation Prerequisites

7800-CTRL=

7800 Series Telcom Units

7800-TMS

7800 N+1 Patch Panel

7800 1+1 Patch Panel

7800 RJ48C Patch Panel

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.

Always follow ESD prevention procedures when removing and replacing modules:

Ensure that the equipment is grounded.
Wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the wrist strap clip to an unpainted surface of the equipment or the grounded equipment rack in order to channel away all ESD voltage safely to ground. To guard against ESD damage and shocks, the wrist strap and cord must be in proper working condition.
If no wrist strap is available, and you must work with the equipment, ground yourself by touching a metal part of the chassis.

Installation Preparations

Package Contents

7800-CTRL Gateway Controllers

7800 Series Telecom Unit

7800-TMS Media Switch

7800 N+1 Patch Panel

7800 1+1 Patch Panels

Rack Mounting the 7800 Series Gateway Equipment

Prerequisites

Vertical Placement of the Equipment

Installing the 7800 Series Gateway on an Equipment Rack

7800-CTRL

7800 Telecom Units

7800-TMS

7800 N+1 Patch Panel

7800 1+1 Patch Panel

7800 RJ48C Patch Panel

Installing the 7800-CTRL

Connecting to the 7800 Series Gateway Management Interface

Connecting to the 7800 Series Control Network

Connecting to the Data Network

Powering Up

Connecting to AC Power

Installing the 7800 Series Telecom Units

Connecting to the Control Network

Connecting to the VoIP Network(s)

Connecting to the PSTN

SCSI Interface (T1/E1) for the TMG7800-TE

Standalone Configuration

1+1 Configuration

Dual BNC Interface (DS3) for the TMG7800-DS3

Standalone Configuration

1+1 Configuration

OC3/STM-1 Interface for the TMG7800-STM1

Standalone Configuration

1+1 Configuration

N+1 Configuration

Connecting to the TMS Network

Connecting to the TMG7800 Telecom Units

Prerequisites

Interconnections

Interconnecting Two 7800 Telecom Units

Grounding the Equipment Chassis

Powering Up

Connecting to AC Power

Connecting to DC Power

Installing the 7800-TMS

Connecting to the Control Network

Grounding the Equipment Chassis

7800 TMS

Powering Up

Connecting to AC Power

Connecting to DC Power

TDM System Clock

Installing the 7800 N+1 Patch Panel

Connecting Fiber Optic Cables to the 7800 N+1 Patch Panel

Connecting to the Control Network

Grounding the Equipment Chassis

Connecting to AC Power

Start Up and Verification

Start Up

Verifying the LED Status Indications

7800-CTRL

7800 Telecom Unit

7800-TMS

7800 N+1 Patch Panel

Powering Down the Equipment

7800-CTRL

Local Method=

Remote Method

7800 Telecom Unit

7800-TMS

7800 N+1 Patch Panel

Initial System Configuration

7800 Series Gateway SSH Connection

7800 Series Gateway Serial Connection

Connecting to the 7800-CTRL Console

Configuring the Terminal Emulator Application

Changing the 7800 Series Gateway Management Port IP Address

Retrieving 7800 Series Gateway Information

Changing 7800 Series Gateway Management Port Passwords

Configuring the 7800 Series Gateway Using the Web Portal

System Backups

Creating a Database Backup

Downloading a Database Backup

Uploading a Database Backup

Restoring a Database Backup

Wiring Diagrams

RJ48C Wiring Diagram: Crossover and Straight Cables

RJ48 Console Wiring Diagram

@@ Line 7: / Line 7: @@
 ==Conventions==
 ----
+<br><br>
 ==Contact Us==
 ----
+<br><br>
-==Introduction==
+=Introduction=
 ----
+<br><br>
-===Identifying the 7800 Series Gateway Equipment===
+==Identifying the 7800 Series Gateway Equipment==
 ----
+<br><br>
-===Installation Prerequisites===
+==Installation Prerequisites==
 ----
+<br><br>
-====7800-CTRL====
+===7800-CTRL====
 ----
+<br><br>
-====7800 Series Telcom Units====
+===7800 Series Telcom Units===
 ----
+<br><br>
-====7800-TMS====
+===7800-TMS===
 ----
+<br><br>
-====7800 N+1 Patch Panel====
+===7800 N+1 Patch Panel===
 ----
+<br><br>
-====7800 1+1 Patch Panel====
+===7800 1+1 Patch Panel===
 ----
+<br><br>
-====7800 RJ48C Patch Panel====
+===7800 RJ48C Patch Panel===
 ----
+<br><br>
-===Preventing Electrostatic Discharge Damage===
+==Preventing Electrostatic Discharge Damage==
 ----
 Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.
@@ Line 61: / Line 72: @@
 <br><br>
-===Recommended Reading===
+==Recommended Reading==
 ----
 This document is written with the assumption that you have a clear understanding of the installation of the equipment described in this document and you are trained to work with the equipment. If you have any technical questions, TelcoBridges TB Support can be reached at the following numbers, or an email can be sent to: [mailto:support@telcobridges.com support].
@@ Line 71: / Line 82: @@
 <br><br>
-==Installation Preparations==
+=Installation Preparations=
+----
+<br><br>
+==Package Contents==
 ----
 <br><br>
 ===7800-CTRL Gateway Controllers===
-----
 <br><br>
@@ Line 134: / Line 149: @@
 <br><br>
-==Installing the 7800-CTRL==
+=Installing the 7800-CTRL=
 ----
 <br><br>
-===Connecting to the 7800 Series Gateway Management Interface===
+==Connecting to the 7800 Series Gateway Management Interface==
 ----
 <br><br>
-===Connecting to the 7800 Series Control Network===
+==Connecting to the 7800 Series Control Network==
 ----
 <br><br>
-===Connecting to the Data Network===
+==Connecting to the Data Network==
 ----
 <br><br>
-===Powering Up===
+==Powering Up==
 ----
 <br><br>
-====Connecting to AC Power====
+===Connecting to AC Power===
 ----
 <br><br>
-==Installing the 7800 Series Telecom Units==
+=Installing the 7800 Series Telecom Units=
 ----
 <br><br>
-===Connecting to the Control Network===
+==Connecting to the Control Network==
 ----
 <br><br>
-===Connecting to the VoIP Network(s)===
+==Connecting to the VoIP Network(s)==
 ----
 <br><br>
-===Connecting to the PSTN===
+==Connecting to the PSTN==
 ----
 <br><br>
-====SCSI Interface (T1/E1) for the TMG7800-TE====
+===SCSI Interface (T1/E1) for the TMG7800-TE===
 ----
 <br><br>
-=====Standalone Configuration=====
+====Standalone Configuration====
 ----
 <br><br>
-=====1+1 Configuration=====
+====1+1 Configuration====
 ----
 <br><br>
-====Dual BNC Interface (DS3) for the TMG7800-DS3====
+===Dual BNC Interface (DS3) for the TMG7800-DS3===
 ----
 <br><br>
-=====Standalone Configuration=====
+====Standalone Configuration====
 ----
 <br><br>
-=====1+1 Configuration=====
+====1+1 Configuration====
 ----
 <br><br>
-====OC3/STM-1 Interface for the TMG7800-STM1====
+===OC3/STM-1 Interface for the TMG7800-STM1===
 ----
 <br><br>
-=====Standalone Configuration=====
+====Standalone Configuration====
 ----
 <br><br>
-=====1+1 Configuration=====
+====1+1 Configuration====
 ----
 <br><br>
-=====N+1 Configuration=====
+====N+1 Configuration====
 ----
 <br><br>
-===Connecting to the TMS Network===
+==Connecting to the TMS Network==
 ----
 <br><br>
-====Connecting to the TMG7800 Telecom Units====
+===Connecting to the TMG7800 Telecom Units===
 ----
 <br><br>
-=====Prerequisites=====
+====Prerequisites====
 ----
 <br><br>
-=====Interconnections=====
+====Interconnections====
 ----
 <br><br>
-====Interconnecting Two 7800 Telecom Units====
+===Interconnecting Two 7800 Telecom Units===
 ----
 <br><br>
-===Grounding the Equipment Chassis===
+==Grounding the Equipment Chassis==
 ----
 <br><br>
-===Powering Up===
+==Powering Up==
 ----
 <br><br>
-====Connecting to AC Power====
+===Connecting to AC Power===
 ----
 <br><br>
-====Connecting to DC Power====
+===Connecting to DC Power===
 ----
 <br><br>
-==Installing the 7800-TMS==
+=Installing the 7800-TMS=
 ----
 <br><br>
-===Connecting to the Control Network===
+==Connecting to the Control Network==
 ----
 <br><br>
-===Grounding the Equipment Chassis===
+==Grounding the Equipment Chassis==
 ----
 <br><br>
-====7800 TMS====
+===7800 TMS===
 ----
 <br><br>
-===Powering Up===
+==Powering Up==
 ----
 <br><br>
-====Connecting to AC Power====
+===Connecting to AC Power===
 ----
 <br><br>
-====Connecting to DC Power====
+===Connecting to DC Power===
 ----
 <br><br>
-===TDM System Clock===
+==TDM System Clock==
 ----
 <br><br>
-==Installing the 7800 N+1 Patch Panel==
+=Installing the 7800 N+1 Patch Panel=
 ----
 <br><br>
-===Connecting Fiber Optic Cables to the 7800 N+1 Patch Panel===
+==Connecting Fiber Optic Cables to the 7800 N+1 Patch Panel==
 ----
 <br><br>
-===Connecting to the Control Network===
+==Connecting to the Control Network==
 ----
 <br><br>
-===Grounding the Equipment Chassis===
+==Grounding the Equipment Chassis==
 ----
 <br><br>
-===Connecting to AC Power===
+==Connecting to AC Power==
 ----
 <br><br>
-==Start Up and Verification==
+=Start Up and Verification=
 ----
 <br><br>
-===Start Up===
+==Start Up==
 ----
 <br><br>
-===Verifying the LED Status Indications===
+==Verifying the LED Status Indications==
 ----
 <br><br>
-====7800-CTRL===
+===7800-CTRL===
 ----
 <br><br>
-====7800 Telecom Unit===
+===7800 Telecom Unit===
 ----
 <br><br>
-====7800-TMS====
+===7800-TMS===
 ----
 <br><br>
-====7800 N+1 Patch Panel====
+===7800 N+1 Patch Panel===
 ----
 <br><br>
-==Powering Down the Equipment==
+=Powering Down the Equipment=
 ----
 <br><br>
-===7800-CTRL===
+==7800-CTRL==
 ----
 <br><br>
+===Local Method====
-====Local Method====
 ----
 <br><br>
-====Remote Method====
+===Remote Method===
 ----
 <br><br>
-===7800 Telecom Unit===
+==7800 Telecom Unit==
 ----
 <br><br>
-===7800-TMS===
+==7800-TMS==
 ----
 <br><br>
-===7800 N+1 Patch Panel===
+==7800 N+1 Patch Panel==
 ----
 <br><br>
-==Initial System Configuration==
+=Initial System Configuration=
 ----
 <br><br>
-===7800 Series Gateway SSH Connection===
+==7800 Series Gateway SSH Connection==
 ----
 <br><br>
-===7800 Series Gateway Serial Connection===
+==7800 Series Gateway Serial Connection==
 ----
 <br><br>
-====Connecting to the 7800-CTRL Console====
+===Connecting to the 7800-CTRL Console===
 ----
 <br><br>
-====Configuring the Terminal Emulator Application====
+===Configuring the Terminal Emulator Application===
 ----
 <br><br>
-===Changing the 7800 Series Gateway Management Port IP Address===
+==Changing the 7800 Series Gateway Management Port IP Address==
 ----
 <br><br>
-===Retrieving 7800 Series Gateway Information===
+==Retrieving 7800 Series Gateway Information==
 ----
 <br><br>
-===Changing 7800 Series Gateway Management Port Passwords===
+==Changing 7800 Series Gateway Management Port Passwords==
 ----
 <br><br>
-===Configuring the 7800 Series Gateway Using the Web Portal===
+==Configuring the 7800 Series Gateway Using the Web Portal==
 ----
 <br><br>
-==System Backups==
+=System Backups=
 ----
 <br><br>
-===Creating a Database Backup===
+==Creating a Database Backup==
 ----
 <br><br>
-===Downloading a Database Backup===
+==Downloading a Database Backup==
 ----
 <br><br>
-===Uploading a Database Backup===
+==Uploading a Database Backup==
 ----
 <br><br>
-===Restoring a Database Backup===
+==Restoring a Database Backup==
 ----
 <br><br>
-==Wiring Diagrams==
+=Wiring Diagrams=
 ----
 <br><br>
-===RJ48C Wiring Diagram: Crossover and Straight Cables===
+==RJ48C Wiring Diagram: Crossover and Straight Cables==
 ----
 <br><br>
-===RJ48 Console Wiring Diagram===
+==RJ48 Console Wiring Diagram==
 ----
 <br><br>

7800 Series Gateway: Difference between revisions

Revision as of 10:38, 8 October 2024

About this Guide

Conventions

Contact Us

Introduction

Identifying the 7800 Series Gateway Equipment

Installation Prerequisites

7800-CTRL=

7800 Series Telcom Units

7800-TMS

7800 N+1 Patch Panel

7800 1+1 Patch Panel

7800 RJ48C Patch Panel

Preventing Electrostatic Discharge Damage

Recommended Reading

Installation Preparations

Package Contents

7800-CTRL Gateway Controllers

7800 Series Telecom Unit

7800-TMS Media Switch

7800 N+1 Patch Panel

7800 1+1 Patch Panels

Rack Mounting the 7800 Series Gateway Equipment

Prerequisites

Vertical Placement of the Equipment

Installing the 7800 Series Gateway on an Equipment Rack

7800-CTRL

7800 Telecom Units

7800-TMS

7800 N+1 Patch Panel

7800 1+1 Patch Panel

7800 RJ48C Patch Panel

Installing the 7800-CTRL

Connecting to the 7800 Series Gateway Management Interface

Connecting to the 7800 Series Control Network

Connecting to the Data Network

Powering Up

Connecting to AC Power

Installing the 7800 Series Telecom Units

Connecting to the Control Network

Connecting to the VoIP Network(s)

Connecting to the PSTN

SCSI Interface (T1/E1) for the TMG7800-TE

Standalone Configuration

1+1 Configuration

Dual BNC Interface (DS3) for the TMG7800-DS3

Standalone Configuration

1+1 Configuration

OC3/STM-1 Interface for the TMG7800-STM1

Standalone Configuration

1+1 Configuration

N+1 Configuration

Connecting to the TMS Network

Connecting to the TMG7800 Telecom Units

Prerequisites

Interconnections

Interconnecting Two 7800 Telecom Units

Grounding the Equipment Chassis

Powering Up

Connecting to AC Power

Connecting to DC Power

Installing the 7800-TMS

Connecting to the Control Network

Grounding the Equipment Chassis

7800 TMS

Powering Up

Connecting to AC Power

Connecting to DC Power

TDM System Clock

Installing the 7800 N+1 Patch Panel

Connecting Fiber Optic Cables to the 7800 N+1 Patch Panel

Connecting to the Control Network

Grounding the Equipment Chassis

Connecting to AC Power

Start Up and Verification

Start Up

Verifying the LED Status Indications

7800-CTRL

7800 Telecom Unit