ProSBC:VoIP.ms Trunking:Example A: Difference between revisions
(Created page with "{{DISPLAYTITLE: SIP Trunk Configuration Instruction with VoIP.ms SIP trunking}} =Introduction= This article provides you with a step-by-step SIP Trunk Configuration of Fre...") |
No edit summary |
||
| Line 5: | Line 5: | ||
=VoIP.ms SIP Trunk Example= | =VoIP.ms SIP Trunk Example= | ||
[[Image: | [[Image:voipms_Trunking.png|800px| ]] | ||
====Configuration Steps==== | ====Configuration Steps==== | ||
| Line 34: | Line 34: | ||
|} | |} | ||
= NAP Configuration for | = NAP Configuration for VoIP.ms Trunking = | ||
See [[Toolpack:Allocating a SIP Network Access Point (NAP) SBC A|Create SIP NAP]] | |||
In this example, we will use 208.100.60.17 trunk information | |||
[[Image:voip.ms_nap_1.png]] | |||
* [[Parameter: Name|Name]] Any name of your choice (Preferably one that will let you know this is the VoIP.ms NAP). | |||
* [[Parameter: Default Profile|Default Profile]] | |||
* [[Parameter: Proxy Address|Proxy Address]] Enter the IP address or domain name of the VoIP.ms server where you will register the NAP. | |||
* [[Parameter: Proxy Port Type|Proxy Port Type]] | |||
* [[Parameter: Proxy Port|Proxy Port]] 5060 (VoIP.ms also supports 5080 and 42872 but the SBC must be configured accordingly if you want to use a different port) | |||
* [[Parameter: Poll Remote Proxy|Poll Remote Proxy]] | |||
* [[Parameter: Accept only authorized users|Accept only authorized users]] | |||
Revision as of 04:40, 31 March 2023
Introduction
This article provides you with a step-by-step SIP Trunk Configuration of ProSBC with VoIP.ms Trunking, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this guide, Proxy is (208.100.60.17). You can use FQDN too. In this case, you need to configure the DNS v3.1: DNS configuration.
VoIP.ms SIP Trunk Example
Configuration Steps
| (Step 1) Create IP Network |
(Step 2) Create Protocol Stack |
(Step 3) Create Call Route |
|---|---|---|
|
NAP Configuration for VoIP.ms Trunking
See Create SIP NAP In this example, we will use 208.100.60.17 trunk information
- Name Any name of your choice (Preferably one that will let you know this is the VoIP.ms NAP).
- Default Profile
- Proxy Address Enter the IP address or domain name of the VoIP.ms server where you will register the NAP.
- Proxy Port Type
- Proxy Port 5060 (VoIP.ms also supports 5080 and 42872 but the SBC must be configured accordingly if you want to use a different port)
- Poll Remote Proxy
- Accept only authorized users