Actions

Configure Fax Passthrough D: Difference between revisions

(new 2.8 article)
 
(new 2.8 article)
Line 9: Line 9:




2. Set '''Detection Mode''' to Standard.
2. Click '''Create New Profile'''
[[Image:ConfigureFaxPassthrough_1.png]]


3. Set '''Relay Mode''' to Passthrough.
3. Enter a name for the Fax Profile.
* Click '''Fax/Modem Relay''' to expand the view.


4. Check the '''Switch to FAX relay upon CNG tone''' option.
[[Image:ConfigureFaxPassthrough_2.png]]


5. Set '''Detection type''' to "Silence Suppression off"
4. Configure the settings:
* Set '''Detection Mode''' to Standard.
* Set '''Relay Mode''' to Passthrough.
* Check the '''Switch to FAX relay upon CNG tone''' option.
* Set '''Detection type''' to "Silence Suppression off"
* Verify the the Codec is the same as the remote end.
* Click '''Create'''


6. Verify the the Codec is the same as the remote end.
[[Image:ConfigureFaxPassthrough_3.png]]




[[Image:ConfigureFaxPassthrough_1.png]]
5. Verify thet the '''Profile was successfully created''' message is displayed.
 
[[Image:ConfigureFaxPassthrough_4.png]]

Revision as of 11:52, 7 October 2014

Applies to version(s): v2.8.

To enable passthrough:

1. Select Profiles from the navigation menu.


2. Click Create New Profile

3. Enter a name for the Fax Profile.

  • Click Fax/Modem Relay to expand the view.

4. Configure the settings:

  • Set Detection Mode to Standard.
  • Set Relay Mode to Passthrough.
  • Check the Switch to FAX relay upon CNG tone option.
  • Set Detection type to "Silence Suppression off"
  • Verify the the Codec is the same as the remote end.
  • Click Create


5. Verify thet the Profile was successfully created message is displayed.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Configure_Fax_Passthrough_D&oldid=16821"