SBC Basic configuration: Difference between revisions

Latest revision as of 17:17, 9 May 2024

These are the basic steps to have a working configuration. For more Use Cases, visit ProSBC Use Cases

IP Interfaces

Create the logical connections and set the IP addresses that the SBC is going to use.
Create the IP Interfaces

Create SIP Stack

Enable SIP signaling for the SBC
Creating a SIP Stack

SIP Transport Server

Configure the ports and protocols for the transport servers of the SIP stack.
Create Transport Server

Create NAPs

A Network Access Point or NAP represents the entry point to another network or destination peer (e.g. SIP proxy). A NAP can also be thought of as a trunk group
Create NAPs for one side ('internal', IP PBX, SIP clients) and another side ('external', SIP trunk). We can create an 'Open' NAP, by specifying a network instead of a specific host.
Create NAP or an Open NAP

Create DNS, assign DNS Server

Configure DNS

Create Routes

Create a First Call Route

For more Use Cases, visit ProSBC Use Cases

@@ Line 3: / Line 3: @@
 ===IP Interfaces===
-Create the logical connections and set the IP addresses that the SBC is going to use.
+Create the logical connections and set the IP addresses that the SBC is going to use.<br/>
-https://docs.telcobridges.com/Toolpack:Configuring_IP_Interface_SBC_A
+[[Toolpack:Configuring IP Interface SBC A | Create the IP Interfaces]]
 ===Create SIP Stack===
-https://docs.telcobridges.com/Toolpack:Creating_a_SIP_Stack_SBC_A
+Enable SIP signaling for the SBC<br/>
+[[Toolpack:Creating a SIP Stack SBC A | Creating a SIP Stack ]]
 ===SIP Transport Server===
-https://docs.telcobridges.com/Toolpack:Creating_a_SIP_Transport_Server_SBC_A
+Configure the ports and protocols for the transport servers of the SIP stack.<br>
-===Create NAPs for one side ('internal', IP PBX, SIP clients) and another side ('external', SIP trunk)===
+[[Toolpack:Creating a SIP Transport Server SBC A | Create Transport Server]]
-A Network Access Point or NAP represents the entry point to another network or destination peer (e.g. SIP proxy, ISUP interface peer, etc). A NAP can also be thought of as a trunk group<br/>
-https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Network_Access_Point_(NAP)_SBC_A<br/>
+===Create NAPs===
-or an OPEN NAP <br/>
+A Network Access Point or NAP represents the entry point to another network or destination peer (e.g. SIP proxy). A NAP can also be thought of as a trunk group<br/>
-https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Open_Network_Access_Point_(NAP)_SBC_A
+Create NAPs for one side ('internal', IP PBX, SIP clients) and another side ('external', SIP trunk). We can create an 'Open' NAP, by specifying a network instead of a specific host.<br/>
+[[Toolpack:Allocating a SIP Network Access Point (NAP) SBC A | Create NAP ]] or an [[Toolpack:Allocating a SIP Open Network Access Point (NAP) SBC A | Open NAP]]
 ===Create DNS, assign DNS Server===
-https://docs.telcobridges.com/Toolpack:Configuring_DNS_Parameters_C
+[[Toolpack:Configuring DNS Parameters C | Configure DNS]]
 ===Create Routes===
-[[Toolpack:Creating_a_First_Call_Route_D | Creating a First Call Route ]]
+[[Toolpack:Creating_a_First_Call_Route_D | Create a First Call Route ]]
+<p>
+For more Use Cases, visit [[ProSBC Use Cases]]