Latest revision as of 04:23, 31 May 2023

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud VoIP PBX.

ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
Wildix Cloud VoIP PBX. For additional information on Wildix, visit Wildix Cloud VoIP PBX website.

Step-by-step example SIP Trunk configuration.

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

Revision as of 03:21, 31 May 2023 (view source) Serdar Civici (talk \| contribs) (→‎Example Configuration) ← Older edit		Latest revision as of 04:23, 31 May 2023 (view source) Serdar Civici (talk \| contribs) (→‎Introduction)
Line 3:		Line 3:
	=Introduction=		=Introduction=

	This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud.		This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud VoIP PBX.