Latest revision as of 04:23, 31 May 2023

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud VoIP PBX.

ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
Wildix Cloud VoIP PBX. For additional information on Wildix, visit Wildix Cloud VoIP PBX website.

Step-by-step example SIP Trunk configuration.

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

@@ Line 3: / Line 3: @@
 =Introduction=
-This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud.
+This Configuration Note describes how to set up Telcobridges ProSBC for interworking between Wildix Cloud VoIP PBX.
@@ Line 18: / Line 18: @@
 Step-by-step example SIP Trunk configuration.
 *[[ProSBC:Wildix Cloud VoIP PBX:Trunk Configuration:Wildix Cloud VoIP PBX|Adding ProSBC as a SIP Trunk in Wildix Cloud VoIP PBX]]
-*[[ProSBC:Yeastar P-Series Cloud SIP Trunk:Configuration_A|SIP Trunk Configuration Instruction with Yeastar P-Series Cloud]]
+*[[ProSBC:Wildix Cloud VoIP PBX SIP Trunk:Configuration_A|SIP Trunk Configuration Instruction with Wildix Cloud VoIP PBX]]
 ==Troubleshooting==