Latest revision as of 14:52, 9 April 2021

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for FreeSWITCH server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
For additional information on FreeSWITCH, visit FreeSWITCH offical web site.

Example Environments for SIP Trunking with FreeSWITCH

Example Configuration

Step by step example SIP Trunk configuration.

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of FreeSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

@@ Line 1: / Line 1: @@
-{{DISPLAYTITLE:FreeSBC:FreeSWITCH}}
+{{DISPLAYTITLE:ProSBC:FreeSWITCH}}
 =Introduction=
@@ Line 42: / Line 42: @@
 | valign="top" |
-*[[Advanced_Troubleshooting_of_Free_SBC|Advanced Troubleshooting of ProSBC]]
+*[[FreeSBC_Troubleshooting|Advanced Troubleshooting of ProSBC]]
 |}

FreeSBC:FreeSwitch: Difference between revisions