Actions

FreeSBC:3CX SIP Trunk:Configuration A: Difference between revisions
mNo edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
=== '''''Applies to version: v3.1''''' ===
{{DISPLAYTITLE:SIP Trunk Configuration Instruction with 3CX}}
{{DISPLAYTITLE:SIP Trunk Configuration Instruction with 3CX}}


{| class="wikitable"
|-
|rowspan="3"|This article applies to:
|'''Product'''
|'''Version'''
|-
|SBC
|3.1
|}
=Introduction=
=Introduction=
SIP Trunk Configuration Instruction with 3CX Example Configuration provides you with a step by step SIP Trunk Configuration of [[FreeSBC|FreeSbc]] with 3CX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. In this guide FQDN (telcobridges.3cx.ca) configured in the 3CX server. Please check how to configure the SIP Trunk in 3CX for ProSBC from [[FreeSBC:3CX SIP Trunk Configuration:3CX_SIP_Trunk|Adding ProSBC as a SIP Trunk in 3CX Server]]  
This SIP Trunk Configuration Instruction with a 3CX Example Configuration provides you with a step-by-step SIP Trunk Configuration of [[FreeSBC|ProSBC]] with 3CX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this guide FQDN (telcobridges.3cx.ca) is configured in the 3CX server. Learn how to configure the SIP Trunk in 3CX for ProSBC from [[FreeSBC:3CX SIP Trunk Configuration:3CX_SIP_Trunk|Adding ProSBC as a SIP Trunk in 3CX Server]]


=3CX SIP Trunk Example=
=3CX SIP Trunk Example=
Line 41: Line 48:


* See [[Toolpack:Allocating a SIP Network Access Point (NAP) SBC A|Create SIP NAP]]  
* See [[Toolpack:Allocating a SIP Network Access Point (NAP) SBC A|Create SIP NAP]]  
** Here, You must create two NAPs, one SIP NAP will be 3CX NAP and other NAP will be for SIP trunk provided by ITSP
** At this point, you must create two NAPs, one SIP NAP will be a 3CX NAP, and the other NAP will be for a SIP trunk provided by the ITSP.

Latest revision as of 10:47, 16 May 2022


This article applies to: Product Version
SBC 3.1

Introduction

This SIP Trunk Configuration Instruction with a 3CX Example Configuration provides you with a step-by-step SIP Trunk Configuration of ProSBC with 3CX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this guide FQDN (telcobridges.3cx.ca) is configured in the 3CX server. Learn how to configure the SIP Trunk in 3CX for ProSBC from Adding ProSBC as a SIP Trunk in 3CX Server

3CX SIP Trunk Example

Configuration Steps

(Step 1)
Create IP Network 		(Step 2)
Create Protocol Stack 		(Step 3)
Create Call Route


NAP Configuration

  • See Create SIP NAP
    • At this point, you must create two NAPs, one SIP NAP will be a 3CX NAP, and the other NAP will be for a SIP trunk provided by the ITSP.
Retrieved from "https://docs.telcobridges.com/w/index.php?title=FreeSBC:3CX_SIP_Trunk:Configuration_A&oldid=31640"