Toolpack:Creating a N+1 Group A: Difference between revisions

Latest revision as of 10:18, 31 July 2013

Once the N+1 patch panel is created, you must create an N+1 group to assign each hardware unit to their correct position.

To create an N+1 Patch Panel:

1- Click N+1 in the navigation panel

2- Click Create New N+1 Group

3- Set the correct serial number of a unit to the correct patch panel port.

4- Verify that the newly added N+1 patch panel appears in the N+1 Groups list.

@@ Line 2: / Line 2: @@
 {{DISPLAYTITLE:Creating an N+1 Group}}
-N+1 indentifies the N+1 patch panel providing backup protection.  To assign a device as the N+1 patch panel, you must use the Tmedia [[Web Portal]].
+Once the N+1 patch panel is created, you must create an N+1 group to assign each hardware unit to their correct position.
 '''To create an N+1 Patch Panel:'''
@@ Line 9: / Line 9: @@
-[[Image:Nplus1_0.png]]
+[[Image:N_Plus_One_0.png]]
@@ Line 15: / Line 15: @@
-[[Image:Nplus1_1.png]]
+[[Image:N_Plus_One_1.png]]
-- Enter the name of the Patch Panel.
+- Set the correct serial number of a unit to the correct patch panel port.
-* Set the correct serial number of a unit to the correct patch panel port.
-* Enter the location of the device
-* Enter a meaningful description for the device.
 * Click '''Create'''
-[[Image:Nplus1_2.png]]
+[[Image:N_Plus_One_2.png]]
-- Verify that the newly added N+1 patch panel appears in the '''N+1 Patch Panels''' list.
+- Verify that the newly added N+1 patch panel appears in the '''N+1 Groups''' list.
-[[Image:Nplus1_3.png]]
+[[Image:N_Plus_One_4.png]]