Toolpack:Creating MTP3 Links A: Difference between revisions

Latest revision as of 10:22, 15 July 2013

Applies to version(s): v2.5, v2.6., v2.7

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with an MTP2 link; they are connected in a one-to-one fashion.

To create an MTP3 link:

1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

2- Configure the new MTP3 link:

Enter a name for the link
Under Type of link to bind, select MTP2
Select an MTP2 link
Click Create

3- Verify that the "Mtp3Link was successfully created" message appears

List of Parameters

Name
Type of Link to Bind
Depending on the type chosen:

@@ Line 1: / Line 1: @@
-=== '''''Applies to version(s): v2.5, v2.6.''''' ===
+=== '''''Applies to version(s): v2.5, v2.6., v2.7''''' ===
-{{DISPLAYTITLE:Toolpack: Navigating the Web Portal}}
+{{DISPLAYTITLE:Creating MTP3 Links}}
 Now that you have created an MTP3 linkset, you must create MTP3 links for your system.
 An MTP3 link is used to connect with an MTP2 link; they are connected in a one-to-one fashion.