Actions

Configuring IP Interfaces

Revision as of 17:10, 6 February 2011 by Allyntree (talk | contribs)

The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:

  • IP Address
  • Netmask
  • Gateway

To configure a VoIP0 or VoIP1 port

1. Select IP Interfaces from the navigation panel:


2. Click 'Edit' from the IP Interfaces Information panel:

3. Configure the port:

  • Indicate whether or not to use DHCP on this port
  • Enter an IP address
  • Enter a Netmask
  • Enter a gateway address

Note: the IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets

4. The changes are displayed in the IP interfaces information panel.

Note: To apply the IP configuration change, activate the current configuration, and then reboot the adapter.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Configuring_IP_Interfaces&oldid=8533"