ProSBC:Yeastar P-Series Cloud Configuration with ProSBC

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk for Yeastar P-Series Cloud.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Yeastar P-Series Cloud. For additional information on Brekeke, visit Yeastar P-Series Cloud official web site.

Example Environments for SIPTrunking with BYeastar P-Series Cloud

Example Configuration

Step by step example SIP Trunk configuration.

• Adding ProSBC as a SIP Trunk in Yeastar P-Series Cloud
• SIP Trunk Configuration Instruction with Yeastar P-Series Cloud

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC