ProSBC:Yeastar P-Series Cloud Configuration with ProSBC
Introduction
This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk for Yeastar P-Series Cloud.
Prerequisites
- ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
- Yeastar P-Series Cloud.For additional information on Brekeke, visit Brekeke official web site.
Example Environments for SIPTrunking with BYeastar P-Series Cloud
Example Configuration
Step by step example SIP Trunk configuration.
- Adding ProSBC as a SIP Trunk in Yeastar P-Series Cloud
- SIP Trunk Configuration Instruction with Yeastar P-Series Cloud
Troubleshooting
| Call Trace | Test Call | TBReport | Advanced Troubleshooting of ProSBC |
|---|---|---|---|