Actions

IP Network Configuration Use Case:Two tagged VLAN, Four IP Addresses, all through VoIP ports, SIP/RTP on separate IP

Revision as of 06:01, 23 September 2016 by Victor Ng (talk | contribs) (Created page with "=== '''''Applies to version(s): v2.8.''''' === {{DISPLAYTITLE:IP Network Configuration Use Case:Two tagged VLAN, Four IP Addresses, all through VoIP ports, SIP/RTP on separate...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.8.

Two tagged VLAN, Four IP Addresses, all through VoIP ports, SIP/RTP on separate IP

Configure IP Network A Configure IP Network B

Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports

Vlan 200 uses tagged bonded over VOIP0 and VOIP1 ports

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 10.0.3.10
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 10.0.4.20

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: RADIUS_100
    • Radius -> Radius Server
    • Public IP Address: Empty
Retrieved from "https://docs.telcobridges.com/w/index.php?title=Use_Cases:Network_Configuration_IP_UseCase3_C&oldid=21705"