Configure Fax Passthrough A

Revision as of 17:14, 30 May 2012 by Clod Patry (talk | contribs) (created this page, print-screen will be added shortly.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

To enable passthrough, follow these steps:

1. Make sure "Enable Fax/Modem Relay" is enabled.
2. Make sure "Detection Mode" is Standard.
3. Make sure "Relay Mode" is Passthrough.
4. Make sure "Enable switching to FAX relay upon CNG tone" is checked.
5. Make sure "Detection type" is "Silence Suppression off"
6. Make sure the Codec is the same as the remote end.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Configure_Fax_Passthrough_A&oldid=10899"