Actions

Configuring IP Interfaces

Revision as of 12:24, 6 February 2011 by Allyntree (talk | contribs) (Created page with 'The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following: *IP Address *Netmask *Gateway == To configure a VoIP0 or VoIP1 port == '''1. Select …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:

  • IP Address
  • Netmask
  • Gateway

To configure a VoIP0 or VoIP1 port

1. Select IP Interfaces from the navigation panel.



2. Click 'Edit' from the IP Interfaces Information panel.



3. Enter an IP address, a Netmask, and a gateway address.

Note: the IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets



4. The changes are displayed in the IP interfaces information panel.


Note: To apply the IP configuration change, activate the current configuration, and then reboot the adapter.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Configuring_IP_Interfaces&oldid=8525"