RESTful API: Add MTP3 Point Codes
Add MTP3 Point Codes using tbconfig commands
DisplayMTP3 point codes list
To show the MTP3 point codes list, in general, enter:
tbconfig -u root -p root /configurations/main_config/point_codes
Note: Change “main_config” to the name of your configuration.
Export the current point codes table to a json file
tbconfig /configurations/main_config/point_codes pc.json -r
Note: Change “main_config” to the name of your configuration.
The file pc.json will resemble the following: {
"MTP3_2_2_2" : {
"advanced_parameters" : {
"broadcast" : false,
"route_to_adjacent" : false,
"sls_selector_bit1" : true,
"sls_selector_bit2" : false,
"sls_selector_bit3" : false,
"sls_selector_bit4" : false,
"support_multi_message_prio" : false,
"support_route_congestion_test" : true
},
"mtp3_linksets" : [
"MTP3_LS_ANSI"
],
"name" : "MTP3_2_2_2",
"point_code" : "DPC_2_2_2",
"point_code_type" : "SP",
"sls_range" : "ANSI 5 bits",
"timers" : {
"t6_timer" : "800 milliseconds",
"t8_timer" : "800 milliseconds",
"t10_timer" : "30 seconds",
"t11_timer" : "30 seconds",
"t18_timer" : 11000,
"t19_timer" : "67 seconds",
"t21_timer" : "63 seconds",
"t25_timer" : "30 seconds",
"tc_timer" : "500 milliseconds"
}
},
"MTP3_LOCAL" : {
"advanced_parameters" : {
"broadcast" : false,
"route_to_adjacent" : false,
"sls_selector_bit1" : true,
"sls_selector_bit2" : false,
"sls_selector_bit3" : false,
"sls_selector_bit4" : false,
"support_multi_message_prio" : false,
"support_route_congestion_test" : true
},
"mtp3_linksets" : [
"MTP3_LS_ANSI"
],
"name" : "MTP3_LOCAL",
"point_code" : "OPC_1_1_1",
"point_code_type" : "SP",
"sls_range" : "ANSI 5 bits",
"timers" : {
"t6_timer" : "800 milliseconds",
"t8_timer" : "800 milliseconds",
"t10_timer" : "30 seconds",
"t11_timer" : "30 seconds",
"t18_timer" : 11000,
"t19_timer" : "67 seconds",
"t21_timer" : "63 seconds",
"t25_timer" : "30 seconds",
"tc_timer" : "500 milliseconds"
}
},
"***meta***" : {
"src_path" : "",
"version" : "3.2.55"
}
}
Add the new point codes and save it as pc_new.json
Import pc_new.json
tbconfig /configurations/main_config/point_codes pc_new.json -U
Note: Change “main_config” to the name of your configuration.