Selecting Timeslots for TDM Interfaces

Applies to version(s): 2.9, 2.10, 3.0, 3.2

The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration.

1- Click H.248 in the naviagtion panel.

2- Select the line service you wish to configure, in the H.248 configuration window

(NOTE: A timeslot mask can be applied to all line services at once by selecting Timeslot mask for all line services instead)

3- Select timeslots:

• Add the desired timeslots by checking individual boxes, or simply select all timeslots by clicking Select all
• Click Save

4- Verify that the "h248_fix_term_cfg was successfully updated" message appears

Path

h248_statcks->gateway_h248->h248_tdm_terminations->YourTrunk->TimeslotMask