Creating an M3UA Route (ASP)

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an M3UA route on an ASP:

1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

Enter a name for the route
Select a route type:Psrv
Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
Select an M3UA user part:Select the previously configured M3UA user part
Select a point code: Select the OPC (ISUP/SCCP Interface OPC)
Select a point code mask (Recommended value: Exact match)
Select a sub-service field type:ISUP or SCCP
Click Create

For DPC: This route is used to reach the DPC used in MTP3 configuration.

Enter a name for the route
Select a route type:Psrv
Select a M3UA peer server: Select the previously configured M3UA remote Peer Server with the right RC
Select an M3UA user part: NONE
Select a point code: Select the DPC (Remote ISUP/SCCP Interface)
Select a point code mask (Recommended value: Exact match)
Select a sub-service field type:ISUP or SCCP
Click Create

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters