Actions

Creating a SIP Registrar

Revision as of 16:29, 9 May 2017 by Cbilodeau (talk | contribs) (improve parameters description)

Applies to version(s): v3.0

A SIP registrar represents a SIP endpoint that provide a location service. You must configure SIP Registrar for your system. The first step in doing so is to select your SIP Domain:


1- Click on your domain in the SIP Domain List


2- Click Create New SIP Registration Registrar


3- Create the new SIP Registration Registrar

  • Enter a Name for the SIP Registration Registrar
  • Enter an Address to reach the registrar
  • Select the registrar destination Port
  • Set the Expires value used by SBC when the remote device doesn't supply one (Minimum Contact Expires)
  • Select which local interface will be use to send REGISTER message in SIP Transport Server
  • Click Create


4- Verify that the Sip registration registrar was successfully created message appears

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_a_SIP_Registrar_SBC_A&oldid=23418"