Defining a Clocking Source
Applies to version(s): v2.8.
A network clock is a necessary component of a TDM network. Synchronizing your system to a clock will ensure that a good condition of your system is maintained. It is recommended that you configure an external clocking source for your system.
To configure a clock:
1- Click Clocking in the navigation panel
2- Click Create New External System Clock Reference
3- Create the new clocking source:
- Select the appropriate hardware adapter
- Select a clock reference type (in this example, Line Service is selected)
- Select a clock reference source (in this example "Line_Service_00")
Note: In this example, Line Service is selected chosen as the reference type, and a line service is selected as the clocking source.
To
4- Verify that the System Clock was successfully created message appears, and that the new clocking source appears in the External System Clock Reference List
