Web Portal:Configuration Copy: Difference between revisions

Revision as of 14:54, 2 July 2009

This page describes the steps required to copy a configuration within Toolpack web portal.

Note: This page assumes that you are using the Gateway application. If you are using your own application, you will be required to perform the same steps but for your plug-in.

Copy Configuration

Go to the Configuration menu.
Click on the Copy link of the configuration you wish to copy.
Enter the name of your new configuration.
Click the Copy button.
After a copy of your configuration has been created, click on the Configure Now link of your new configuration.

Create a new Gateway/Plug in application configuration

Go to the Gateway -> Configurations menu.
Click on the Create New Configuration link.
Complete the form. The Configuration should be set to the name of your new Configuration.
Click the Create button.

Create a new Gateway/Plug in application instance

Go to the Config -> Applications-> Instances menu.
Click on the Create New Application Instance link.
Complete the form. The Application Config should be set to the name of your new Gateway/Plug-in application configuration.
Click the Create button.

@@ Line 1: / Line 1: @@
-This page describes the steps required to copy a configuration with the web portal
+This page describes the steps required to copy a configuration within Toolpack web portal.
-'''Note''': This page assumes that you are using the gateway application. If you are using your own application, you will be required to do the same step but for your plug in.
+'''Note''': This page assumes that you are using the Gateway application. If you are using your own application, you will be required to perform the same steps but for your plug-in.
 == Copy Configuration ==
-*Go in the '''Configuration''' menu.
+*Go to the '''Configuration''' menu.
-*Click the '''Copy''' link of the configuration you wish to copy.
+*Click on the '''Copy''' link of the configuration you wish to copy.
-*Write the name of your new configuration.
+*Enter the name of your new configuration.
 *Click the '''Copy''' button.
-*After it is copied click on the '''Configure Now''' link of your new configuration.
+*After a copy of your configuration has been created, click on the '''Configure Now''' link of your new configuration.
 == Create a new Gateway/Plug in application configuration ==
-*Go in the '''Gateway->Configurations''' menu.
+*Go to the '''Gateway -> Configurations''' menu.
-*Click the '''Create New Configuration''' link.
+*Click on the '''Create New Configuration''' link.
-*Fill the form, the '''Configuration''' should be set to the name of your new Configuration.
+*Complete the form. The '''Configuration''' should be set to the name of your new Configuration.
 *Click the '''Create''' button.
 == Create a new Gateway/Plug in application instance ==
-*Go in the '''Config->Applications->Instances''' menu.
+*Go to the '''Config -> Applications-> Instances''' menu.
-*Click the '''Create New Application Instance''' link.
+*Click on the '''Create New Application Instance''' link.
-*Fill the form, the '''Application Config''' should be set to the name of your new Gateway/Plug in application configuration.
+*Complete the form. The '''Application Config''' should be set to the name of your new Gateway/Plug-in application configuration.
 *Click the '''Create''' button.