Toolpack:Creating MTP3 Links (M2PA) A: Difference between revisions

Revision as of 16:34, 6 August 2010

Now that you have created an MTP3 linkset, you must create MTP3 links for it. This can be done from the MTP3 linkset configuration window. A linkset is used to logically combine multiple MTP3 links going to the same DPC into a single entity. One linkset could be comprised of the links between a point code identifying the Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.

To create an MTP3 link:

1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

2- Configure the new MTP3 link:

Enter a name for the link
Under Type of link to bind, select M2PA.
Select an MTP2 link
Select a priority level (from 0 to 3)
Select a message priority (from "none" to 3)
Set the C Link value
Enter a Link Test Slc (this value is unique in the link list)
Enter Link Test Characters
Click Create

3- Verify that the "Mtp3Link was successfully created" message appears

@@ Line 26: / Line 26: @@
 [[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: Type of Link to Bind|Type of Link to Bind]]
+* [[Parameter: MTP2 Link|MTP2 Link]]
+* [[Parameter: Priority Level|Priority Level]]
+* [[Parameter: Message Priority|Message Priority]]
+* [[Parameter: C Link|C Link]]
+* [[Parameter: Link Test Slc|Link Test Slc]]
+* [[Parameter: Link Test Characters|Link Test Characters]]