Toolpack:Creating an SCCP Userpart A: Difference between revisions

Revision as of 14:33, 7 July 2010

The Userpart is the container for the multiple SCCP interfaces. One Userpart is required for each protocol variant.

multiple SCCP userpart can be instantiated within a single SCCP protocol layer. This allows a user application to interface with multiple SS7 SCCP protocol variants at the same time. Only one SCCP userpart is required for a specific variant as it can be assigned to multiple SCCP networks.

A Userpart can easily be seen as a protocol variant that a host application wants to use on the SS7 network.

To Create an SCCP User Part:

1- Click Create New SCCP User Part to access the SCCP configuration window

2- Configure the new SCCP user part

Enter a name for the user part
Enter a sub-system number
Select the first concerned point code
Select the second concerned point code
Click Create

3- Verify that the SCCP Userpart was successfully created message appears

@@ Line 31: / Line 31: @@
 [[Image:Toolpack_v2.5_SCCP_Userpart_Created.png]]
-- Set an SCCP Backup Point Code:
-* Select a '''point code''' from the menu
-* Associate it with the SCCP userpart by clicking the '''"<<"''' button
-[[Image:Toolpack_v2.5_SCCP_Userpart_Point_Code.png]]
-*Click '''Save'''
-*Verify that the '''SccpUserpart was successfully updated''' message appears
-[[Image:Toolpack_v2.5_SCCP_Userpart_Updated.png]]