Toolpack v2.4:Create an ISUP User Part: Difference between revisions
| Line 8: | Line 8: | ||
*Enter a name for the user part | *Enter a name for the user part | ||
*Select a protocol variant: | *Select a protocol variant: | ||
** | **ANSI88 | ||
** | **ANSI92 | ||
** | **ANSI96 | ||
** | **TELCORDIA | ||
**[[ITU]] | **[[ITU]] | ||
** | **ITU97 | ||
** | **SINGAPORE | ||
** | **Q767 | ||
** | **NTT | ||
** | **CHINA | ||
**[[ETSI]] | **[[ETSI]] | ||
** | **ETSIV3 | ||
** | **UK | ||
*Select an MTP3 sub service field (the same that was previously set for MTP3) | *Select an MTP3 sub service field (the same that was previously set for MTP3) | ||
*Select an address indicator type ("Not Present", Subscriber Number, National Number, or International Number) | *Select an address indicator type ("Not Present", Subscriber Number, National Number, or International Number) | ||
Latest revision as of 11:02, 16 January 2010
To create an ISUP user part:
1. Click "Create New Isup Userpart" in the ISUP stack configuration window:
2. Configure the new ISUP user part:
- Enter a name for the user part
- Select a protocol variant:
- Select an MTP3 sub service field (the same that was previously set for MTP3)
- Select an address indicator type ("Not Present", Subscriber Number, National Number, or International Number)
- Select a Numbering Plan:
- Unknown
- ISDN
- Telephony
- Data
- Telex
- National
- Private
- or, Reserved
- Select an ISUP Release Location:
- User
- Private Network LU
- Public Network LU
- Transit Network
- Private Network RU
- Public Network RU
- Local Interface
- International Network
- Network beyond internetworking point
- or, No info
- Click "Create" to finalize the configuration
3. Verify that the "IsupUserpart was successfully created message appears:
