Toolpack v2.4:Create an ISUP User Part: Difference between revisions
| Line 7: | Line 7: | ||
'''2. Configure the new ISUP user part:''' | '''2. Configure the new ISUP user part:''' | ||
*Enter a name for the user part | *Enter a name for the user part | ||
* | *Select a protocol variant: | ||
**[[ANSI88]] | |||
**[[ANSI92]] | |||
**[[ANSI96]] | |||
**[[TELCORDIA]] | |||
**[[ITU]] | |||
**[[ITU97]] | |||
**[[SINGAPORE]] | |||
**[[Q767]] | |||
**[[NTT]] | |||
**[[CHINA]] | |||
**[[ETSI]] | |||
**[[ETSIV3]] | |||
**[[UK]] | |||
*Select an MTP3 sub service field (the same that was previously set for MTP3) | |||
*Select an address indicator type ("Not Present", Subscriber Number, National Number, or International Number) | |||
*Select a [[Numbering Plan]]: | |||
**Unknown | |||
**ISDN | |||
**Telephony | |||
**Data | |||
**Telex | |||
**National | |||
**Private | |||
**or, Reserved | |||
*Select an [[ISUP Release Location]]: | |||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
Revision as of 14:54, 8 January 2010
To create an ISUP user part:
1. Click "Create New Isup Userpart" in the ISUP stack configuration window:
2. Configure the new ISUP user part:
- Enter a name for the user part
- Select a protocol variant:
- Select an MTP3 sub service field (the same that was previously set for MTP3)
- Select an address indicator type ("Not Present", Subscriber Number, National Number, or International Number)
- Select a Numbering Plan:
- Unknown
- ISDN
- Telephony
- Data
- Telex
- National
- Private
- or, Reserved
- Select an ISUP Release Location:
- Click "Create" to finalize the configuration
3. Verify that the "IsupUserpart was successfully created message appears:
