Toolpack v2.4:Create a NAP

A Network Access Point (NAP) represents the entry point to another network or destination peer.==To create a network access point (NAP):==

1. Click "NAP" in the navigation panel:

2. Click "Create New NAP" in the NAP information panel:

3. Configure the new NAP:

• Enter a name for the NAP
• Click "Create" to finalize the configuration

4. Verify that the "NAP was successfully created" message appears:

Associate a SIP, ISDN, or ISUP with the NAP

5. Associate a SIP access point with the NAP:

• Select an access point
• Click the "<<" button to add the access point to the list

The following screen is displayed:

• Enter a proxy address
• Click "Save" to finalise the configuration

Verify that the "NAP was successfully updated" message appears:

6. Alternately, an ISDN stack can be associated with the NAP:

• Select a stack
• Click the "<<" button to add the stack to the list

The following screen is displayed:

• Click "Save" to finalise the configuration

Verify that the "NAP was successfully updated" message appears:

7. Alternately, an ISUP interface can be associated with the NAP:

• Select an interface
• Click the "<<" button to add the interface to the list

The following screen is displayed:

• Click "Save" to finalise the configuration

Verify that the "NAP was successfully update" message appears: