Use Cases:HW Transcoding Configuration UseCase2 A

This article applies to:	Product	Version
	SBC	3.1, 3.3

Transcoding Unit Configuration

Perequisites ProSBC Host Configuration Network device name Purpose Network device role Network Config mgmt0 Management port mgmt Untagged wan0 SBC port LAN/WAN Tagged 1650 (or other) lan0 SBC port LAN/WAN Tagged 1651 (or other) ctrl0 control port ctrl0 Tagged 750 ctrl1 control port ctrl1 Tagged 751 trans transcoding port LAN/WAN Tagged 752 NOTES: The 'Network device name' for transcoding must be trans. To have redundancy, the trans port bonding (using trans0 and trans1 physical ports) needs to be created at initialization time. For baremetal, the trans port bonding, using trans0 and trans1 physical ports must be bonded at initialization time. You can look here for reference: Initial Configuration (Search for "Bonding") For virtual machines, the virtual ports trans0 and trans1 are bonded in the Hypervisor layer of the virtual machine (optional) and the tran interface is presented to the guest (the ProSBC). Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup. Network device name Purpose Network device role Network Config voip0 transcoding port trans Tagged 752 (Bonded with voip1) voip1 transcoding port trans Tagged 752 (Bonded with voip0) eth0 control port ctrl0 Untagged PVID 750 ** eth1 control port ctrl1 Untagged PVID 751 ** NOTE: Since the control ports on the device cannot be tagged, this must be done by the network switch. The control ports need to be configure with Link Type: Access Configuration ProSBC Network configuration Configure IP Network for trans Create vp_trans virtual port: Name: vp_trans Ethernet Ports: trans VLAN name: vlan_752 VLAN id: 752 Create trans IP Address: Name: trans Service to use: RTP Host VLAN: vp_trans:vlan_752 IP address: 192.168.152.1 Netmask: 255.255.255.0 Transcoding unit configuration Add transcoding unit Show transcoding unit Add TB002177 transcoding unit Transcoding unit network configuration Configure IP Network for voip ports Modify voip virtual port: Name: vp_voip Untagged: unselect VLAN id: 752 Physical Ports: Use voip0 and voip1 (ctrl-click) Modify voip IP Address: Interface Name: voip Service to use: RTP Virtual port: TB002177:vp_voip IP address: 192.168.152.10 Netmask: 255.255.255.0