Actions

Use Cases:HW Transcoding Configuration UseCase2 A: Difference between revisions

(Updated page for baremetal configuration)
 
Line 116: Line 116:
|STYLE="vertical-align: top"|
|STYLE="vertical-align: top"|
{| border="1" class="wikitable"
{| border="1" class="wikitable"
! width="500" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure IP Network for voip0
! width="500" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure IP Network for voip ports
! width="500" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure IP Network for voip1
|-
|-
|
|
*Modify [[Toolpack:Configuring_Virtual_Port_SBC_B|voip0 virtual port]]:
*Modify [[Toolpack:Configuring_Virtual_Port_SBC_B|voip0 virtual port]]:
**'''Name''': voip0
**'''Name''': vp_voip
**'''Untagged''': unselect
**'''Untagged''': unselect
**'''VLAN id''': 752
**'''VLAN id''': 752
**'''Physical Ports''': Use voip0 and voip1 (ctrl-click)


*Modify [[Toolpack:Configuring_VoIP_Interfaces_E|voip0 IP Address]]:
*Modify [[Toolpack:Configuring_VoIP_Interfaces_E|voip IP Address]]:
**'''Interface Name''': voip0
**'''Interface Name''': voip
**'''Service to use''': RTP
**'''Service to use''': RTP
**'''Virtual port''': TB002177:voip0
**'''Virtual port''': TB002177:vp_voip
**'''IP address''': 192.168.152.10
**'''IP address''': 192.168.152.10
**'''Netmask''': 255.255.255.0
**'''Netmask''': 255.255.255.0


|
*Modify [[Toolpack:Configuring_Virtual_Port_SBC_B|voip1 virtual port]]:
**'''Name''': voip1
**'''Untagged''': unselect
**'''VLAN id''': 752
*Modify [[Toolpack:Configuring_VoIP_Interfaces_E|voip1 IP Address]]:
**'''Interface Name''': voip1
**'''Service to use''': RTP
**'''Virtual port''': TB002177:voip1
**'''IP address''': 192.168.152.11
**'''Netmask''': 255.255.255.0


|-
|-

Revision as of 12:58, 3 January 2025


This article applies to: Product Version
SBC 3.1, 3.3


Perequisites

Perequisites
  • ProSBC Host
Network device name    Network device role    Network Config
-------------------    -------------------    -------------------
mgmt0                  mgmt                   Untagged
wan0                   LAN/WAN                Tagged 1650
lan0                   LAN/WAN                Tagged 1651
trans                  LAN/WAN                Tagged 752     
ctrl0                  ctrl0                  Tagged 750
ctrl1                  ctrl1                  Tagged 751

NOTE: The 'Network device name' for transcoding must be trans. To have redundancy, the trans port bonding (using trans0 and trans1 physical ports) needs to be created at initialization time. You can look here for reference: Initial Configuration (Search for "Bonding")


  • Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup.
 Network device name    Network device role    Network Config
-------------------    -------------------    -------------------
voip0                   LAN/WAN                Tagged 752
voip1                   LAN/WAN                Tagged 752
eth0                    ctrl0                  Untagged PVID 750  **
eth1                    ctrl1                  Untagged PVID 751  **

NOTE: Since the control ports on the device cannot be tagged, this must be done by the network switch. The control ports need to be configure with Link Type: Access

Baremetal Configuration

ProSBC Network configuration

Configure IP Network for wan0 Configure IP Network for lan0 Configure IP Network for trans
  • Create wan0 IP Address:
    • Name: wan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_wan0:vlan_1650
    • IP address: 192.168.150.1
    • Netmask: 255.255.255.0
  • Create lan0 IP Address:
    • Name: lan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_lan0:vlan_1651
    • IP address: 192.168.151.1
    • Netmask: 255.255.255.0
  • Create trans IP Address:
    • Name: trans
    • Service to use: RTP
    • Host VLAN: vp_trans:vlan_752
    • IP address: 192.168.152.1
    • Netmask: 255.255.255.0

Transcoding unit configuration

Add transcoding unit


Transcoding unit network configuration

Configure IP Network for voip ports
  • Modify voip0 virtual port:
    • Name: vp_voip
    • Untagged: unselect
    • VLAN id: 752
    • Physical Ports: Use voip0 and voip1 (ctrl-click)
  • Modify voip IP Address:
    • Interface Name: voip
    • Service to use: RTP
    • Virtual port: TB002177:vp_voip
    • IP address: 192.168.152.10
    • Netmask: 255.255.255.0


Sip configuration

Configure SIP
  • Configure SIP
    • For WAN0
      • RTP port ranges parameters:
        • Name: pr_wan0
        • IP Interface: vlan_1650:wan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_wan0
        • Port: 5060
        • IP Interface: vlan_1650:wan0
      • SIP NAP parameters:
        • Name: nap_sip_wan0
        • Proxy Address: 192.168.150.10
        • Port Range: vlan_1650:wan0:pr_wan0:20000-40000
        • SIP Transport Servers: ts_wan0
    • For LAN0
      • RTP port ranges parameters:
        • Name: pr_lan0
        • IP Interface: vlan_1651:lan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_lan0
        • Port: 5060
        • IP Interface: vlan_1651:lan0
      • SIP NAP parameters:
        • Name: nap_sip_lan0
        • Proxy Address: 192.168.151.10
        • Port Range: vlan_1651:lan0:pr_lan0:20000-40000
        • SIP Transport Servers: ts_lan0
Retrieved from "https://docs.telcobridges.com/w/index.php?title=Use_Cases:HW_Transcoding_Configuration_UseCase2_A&oldid=34631"