SBC Basic configuration: Difference between revisions
| Line 4: | Line 4: | ||
===IP Interfaces=== | ===IP Interfaces=== | ||
Create the logical connections and set the IP addresses that the SBC is going to use. | Create the logical connections and set the IP addresses that the SBC is going to use. | ||
https://docs.telcobridges.com/Toolpack:Configuring_IP_Interface_SBC_A | [https://docs.telcobridges.com/Toolpack:Configuring_IP_Interface_SBC_A|Create the IP Interfaces] | ||
===Create SIP Stack=== | ===Create SIP Stack=== | ||
Revision as of 16:58, 9 May 2024
These are the basic steps to have a working configuration. For more Use Cases, visit ProSBC Use Cases
IP Interfaces
Create the logical connections and set the IP addresses that the SBC is going to use. the IP Interfaces
Create SIP Stack
Enable SIP signaling for the SBC
https://docs.telcobridges.com/Toolpack:Creating_a_SIP_Stack_SBC_A
SIP Transport Server
Configure the ports and protocols for the transport servers of the SIP stack.
[Create Transport Server]
Create NAPs for one side ('internal', IP PBX, SIP clients) and another side ('external', SIP trunk)
A Network Access Point or NAP represents the entry point to another network or destination peer (e.g. SIP proxy, ISUP interface peer, etc). A NAP can also be thought of as a trunk group
https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Network_Access_Point_(NAP)_SBC_A
or an OPEN NAP
https://docs.telcobridges.com/Toolpack:Allocating_a_SIP_Open_Network_Access_Point_(NAP)_SBC_A
Create DNS, assign DNS Server
https://docs.telcobridges.com/Toolpack:Configuring_DNS_Parameters_C