Actions

Toolpack:Creating an M2UA Cluster C: Difference between revisions

mNo edit summary
mNo edit summary
Line 1: Line 1:
=== '''''Applies to version(s): v2.9, v2.10, v3.0''''' ===
=== '''''Applies to version(s): 2.9, 2.10, 3.0, 3.2''''' ===
{{DISPLAYTITLE:Creating an M2UA Cluster}}
{{DISPLAYTITLE:Creating an M2UA Cluster}}
After you create an M2UA SAP, you must create an M2UA cluster for your system.
After you create an M2UA SAP, you must create an M2UA cluster for your system.

Revision as of 10:06, 21 August 2020

Applies to version(s): 2.9, 2.10, 3.0, 3.2

After you create an M2UA SAP, you must create an M2UA cluster for your system.

To create an M2UA cluster:

1- Click M2UA in the navigation panel


2- Select an M2UA SAP


3- Click Create New M2ua Cluster in the M2UA SAP configuration window


4- Configure the new M2UA cluster:

  • Enter a name for the cluster
  • Select a traffic mode
  • Select a load share mode
  • Click Create


5- Verify that the "M2ua Cluster was successfully created" message appears


Path 

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]/m2ua_saps/@[m2ua_sap]/m2ua_clusters/@[m2ua_cluster]

Parameters (text) 

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2ua_stacks/@[m2ua_stack]/m2ua_saps/@[m2ua_sap]/m2ua_clusters/@[m2ua_cluster]
loadshare_mode = "PER_LINK"
name           = "@[m2ua_cluster]"
traffic_mode   = "ACTIVE_STANDBY"

Parameters (json) 

{
  "loadshare_mode" : "PER_LINK",
  "name" : "@[m2ua_cluster]",
  "traffic_mode" : "ACTIVE_STANDBY"
}


List of Parameters

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_an_M2UA_Cluster_C&oldid=28758"