Create A DNS Group A

Applies to version(s): v3.1

Note: This article describes how to configure a DNS Group, which is not the same as creating a DNS server group for the Linux host.

You can create one or more DNS Groups to manage the DNS Server traffic of Fully Qualified Domain Names.

1- Click DNS in the navigation panel

2- Click Create New DNS Group

3- Enter a name for the DNS Group.

• Click Create

4- Verify that the "DNS group was successfully created" message appears

5- Create a DNS Server for the DNS Group.

• Click Create New DNS Server.

6- Configure the DNS Server.

• Enter a name for the DNS server.
• Enter and IP address for the server.
• Select a Local IP interface.

• Click Create.

7- Verify that the "DNS server was successfully created" message appears

8- Select an IP interface from the list of available interfaces.

• Click to move the available interface over to the Current list.

9- Create a new DNS local entry for the DNS server.

• Click Create New DNS local entry.

10- Configure the DNS local entry.

• Enter a name for the DNS local entry
• Enter an FQDN.

• Click Create.

The DNS Group with the new DNS Server and DNS Local entries are displayed.

List of Parameters

• Name
• Enabled
• Use Cache
• Cache Expire Time
• Query Timer
• Query Retry Count

• Name
• Enabled
• Server Address
• Local IP Interface

Advanced Parameters

• Server DNS Port
• TOS to use in IP header
• Protocol
• Local Port

• Interface name
• Services to use
• Host VLAN
• Use DHCP