Use Cases:HW Transcoding Configuration UseCase1 A: Difference between revisions
Nicole Tan (talk | contribs) (NT: Added Perequisites of the Hardware Unit) |
Nicole Tan (talk | contribs) No edit summary |
||
| Line 13: | Line 13: | ||
| | | | ||
*FREESBC Host | *FREESBC Host | ||
Network device name Network device role | Network device name Network device role Network Config | ||
------------------- ------------------- | ------------------- ------------------- ------------------- | ||
mgmt0 mgmt | mgmt0 mgmt Untagged | ||
wan0 LAN/WAN | wan0 LAN/WAN Tagged 1650 | ||
lan0 LAN/WAN | lan0 LAN/WAN Tagged 1651 | ||
trans0 LAN/WAN | trans0 LAN/WAN Tagged 752 | ||
trans1 LAN/WAN | trans1 LAN/WAN Tagged 753 | ||
ctrl0 ctrl0 | ctrl0 ctrl0 Tagged 750 | ||
ctrl1 ctrl1 | ctrl1 ctrl1 Tagged 751 | ||
*Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup | *Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup | ||
Network device name Network device role | Network device name Network device role Network Config | ||
------------------- ------------------- | ------------------- ------------------- ------------------- | ||
voip0 LAN/WAN | voip0 LAN/WAN Tagged 752 | ||
voip1 LAN/WAN | voip1 LAN/WAN Tagged 753 | ||
eth0 ctrl0 | eth0 ctrl0 Untagged PVID 750 ** | ||
eth1 ctrl1 | eth1 ctrl1 Untagged PVID 751 ** | ||
|- | |- | ||
|} | |} | ||
"**" The control ports on the Hardware unit need to be configure with Link Type: Access | |||
== Two subnet, Two IP Addresses, tagged == | == Two subnet, Two IP Addresses, tagged == | ||
Revision as of 14:50, 11 June 2018
Applies to version(s): v3.0
Perequisites
"**" The control ports on the Hardware unit need to be configure with Link Type: Access Two subnet, Two IP Addresses, tagged
Tsbc network configuration
|
